SA Middle East · updated 2026-11-19
Saudi Arabia passport photo size & requirements
Saudi Arabia asks for 40 × 60 mm (1.57 × 2.36 in) with the head measuring 32–36 mm from chin to crown. Background: White.
Full specification
| Document | Size | Head | Background | Digital / upload |
|---|---|---|---|---|
| Saudi passport / visa | 40 × 60 mm1.57 × 2.36 in | 32–36 mm | White | JPEG |
How to meet this spec in three steps
Open the studio with Saudi Arabia preselected
The frame is locked to 40 × 60 mm and the head band is drawn at 32–36 mm. No manual maths.
Align chin and crown
Zoom until your chin touches the lower guide and the top of your head touches the upper one. The eye line should sit near the middle band.
Export at 472 × 709 px
That is 40 × 60 mm at 300 DPI. If you are uploading, the export panel can hold the file under the portal limit.
Frequently asked
What size is a Saudi Arabia passport photo?
40 × 60 mm, which is 1.57 × 2.36 in. The head must measure 32–36 mm from chin to the top of the head — this is measured, not estimated, and it is the most common reason photos are sent back.
What background colour do I need?
White. Stand at least one metre from the wall so you do not cast a shadow onto it; a grey gradient behind the shoulders reads as an uneven background.
What are the digital upload requirements?
JPEG. The studio exports at the exact pixel size and can compress to the byte limit without going below the minimum dimensions.
Can I take this photo with my phone?
Yes, for every country listed here except where a studio stamp is required on the back of the print (Canada is the main example). Use the normal camera mode, not portrait mode, and shoot from about 1.5 metres in even daylight.
Other countries
Source and accuracy
Compiled from Absher guidance and last checked on 2026-11-19. Rules change without notice — confirm on the official page before you pay for a print run.
PassportSpec is an independent tool and is not affiliated with Absher or any government body.